Usb Board - HP Pavilion DV6-1030 Maintenance And Service Manual

4. Lift the audio/infrared board (4) straight up to remove it from the base enclosure.
Reverse this procedure to install the audio/infrared board.

USB board

Description
USB board for use with computer models equipped with graphics subsystems with UMA graphics
memory (includes cable)
USB board for use with computer models equipped with graphics subsystems with discrete
graphics memory (includes cable)
Before removing the USB board, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC Adapter from the computer.
4. Remove the battery (see
5. Remove the following components:
a. Hard drive (see
b. Optical drive (see
c. Switch cover and keyboard (see
d. Display assembly (see
e. Top cover (see
98 Chapter 4 Removal and replacement procedures
Battery on page 59).
Hard drive on page 69).
Optical drive on page
Switch cover and keyboard on page
Display assembly on page
Top cover on page 91).
62).
81).
Spare part number
516497-001
516855-001
76).