When replacing the system board, be sure that the following additional components are removed from the defective
system board and installed on the replacement system board:
■
Heat sink assembly (see
■
Processor (see
Remove the system board:
1. Turn the computer display-side up, with the right side toward you.
2. Disconnect the following cables from the system board:
1 Modem cable
2 Audio board cable
3 Fan cable
3. Disconnect the power connector cable.
Maintenance and Service Guide
"Heat sink assembly" on page
"Processor" on page
4-59)
Removal and replacement procedures
4-55)
4–51