Creating Recovery Discs - HP Pavilion DV4-2155 Maintenance And Service Manual

Backup and recovery

Creating recovery discs

HP recommends creating recovery discs to be sure that you can restore your system to its original factory state if
you experience serious system failure or instability. Create these discs after setting up the computer for the first
time.
Handle these discs carefully and keep them in a safe place. The software allows the creation of only one set of
recovery discs.
✎
If the computer does not include an internal optical drive, use an optional external optical drive (purchased
separately) to create recovery discs, or purchase recovery discs for the computer from the HP website.
Note the following guidelines before creating recovery discs:
■
Use high-quality DVD-R, DVD+R, BD-R (writable Blu-ray), or CD-R discs. All these discs are purchased
separately. DVDs and BDs have a much higher capacity than CDs. If using CDs, up to 20 discs might be
required, whereas only a few DVDs or BDs are required.
✎
Read-write discs, such as CD-RW, DVD±RW, double-layer DVD±RW, and BD-RE (rewritable
Blu-ray) discs, are not compatible with the Recovery Manager software.
■
The computer must be connected to AC power during this process.
■
Only one set of recovery discs can be created per computer.
■
Number each disc before inserting it into the optical drive.
■
If necessary, exit the program before you have finished creating the recovery discs. The next time you open
Recovery Manager, you are be prompted to continue the disc creation process.
To create a set of recovery discs:
1. Select Start > All Programs > Recovery Manager > Recovery Disc Creation.
2. Recovery Manager opens.
3. Follow the on-screen instructions.
7–2 Maintenance and Service Guide