Power
Selecting Power Conservation Settings
You can set and use the following power conservation settings
only while the computer is in Windows.
To set the computer to use less power in Windows:
■
Select a short wait for the screen saver and select a screen
saver with minimal graphics and motion. To select a screen
saver and a screen saver wait time:
Select Start > Control Panel > Appearance and Themes >
Display > Screen Saver tab, and then follow the instructions
on the screen.
■
Select or create a power scheme that minimizes power use.
For more information about using power schemes, refer to the
"Using Power
Storing a Battery Pack
Ä
CAUTION: To prevent damage to a battery pack, do not expose it to
high temperatures for extended periods of time.
If the computer will be unused and disconnected from external
power for more than 2 weeks, remove and store the battery pack.
High temperatures, which may be present in parked cars or some
workplaces, accelerate the self-discharge rate of a stored battery
pack. To prolong the charge of a stored battery pack, place it in a
location that is cool and dry.
Calibrate a battery pack that has been stored for one month or
more before using it.
3–30
Schemes" section earlier in this chapter.
Hardware and Software Guide