HP Pavilion DV1000t Hardware And Software Manual page 45

The following video transmission types, with examples of devices
that use them, are supported by the
■
LCD (computer display)
■
External VGA (most external monitors)
■
S-Video (televisions, camcorders, VCRs, and video capture
cards with S-Video–in jacks)
■
Composite video (televisions, camcorders, VCRs, and video
capture boards with composite video-in jacks)
✎
Composite video devices can be connected to the system only
by using an HP expansion product.
Initiate Standby (fn+f5)
The
fn+f5
When standby is initiated, your work is stored in random access
memory (RAM), the screen is cleared, and power is conserved.
While the computer is in standby, the power lights blink.
■
To initiate standby, the computer must be on. If the computer
is in hibernation, you must restore from hibernation before
you can initiate standby.
■
To resume from standby, briefly press the power button, use
the TouchPad, press any key on the keyboard, or press a
TouchPad button. To restore from hibernation, briefly press
the power button.
The function of the
you can set the
standby. In all Windows operating system windows, references to
the sleep button apply to the
For information about changing the function of the
refer to the
Chapter 3, "Power."
For more information about using standby and hibernation, refer
to Chapter 3, "Power."
Hardware and Software Guide
hotkey is set by default to initiate standby.
fn+f5
hotkey to initiate hibernation instead of
fn+f5
"Setting Other Power
fn+f4
hotkey can be changed. For example,
hotkey.
fn+f5
Preferences" section in
Keyboard and TouchPad
hotkey:
fn+f5
hotkey,
2–9