Initiating Or Resuming From Standby - HP Pavilion DV1000t Hardware And Software Manual

Power

Initiating or Resuming from Standby

Task
Initiate standby
Allow the system
to initiate
standby
Resume from
standby
*Depending on your computer configuration, you may also be able to resume
from standby by moving or activating a control on an optional mouse or by
opening the display if the computer was closed while in standby.
3–12
Procedure
With the computer on, use any of the
following procedures:
■ Press the fn+f5 hotkey.
■ Close the computer.
■
S
elect Start > Turn Off
Computer > Stand by.
■ In Windows XP Professional,
if Stand by is not displayed:
1. Press the down arrow.
2. Select Stand by from the
drop-down list.
3. Click OK.
No action is required. The system
initiates standby
■ After 10 minutes of inactivity while
running on battery power.
■ After 25 minutes of inactivity while
running on external power.
Press the power button.*
Result
■ Power lights blink.
■ Screen clears.
■ Power lights blink.
■ Screen clears.
■ Power lights are
turned on.
■ Your work returns
to the screen.
Hardware and Software Guide