Table of Contents
Advertisement
6.
Lift up the regulatory label to access the memory modules.
7.
If you are replacing a memory module, remove the existing memory module:
a.
Pull away the retention clips (1) on each side of the memory module.
The memory module tilts up.
b.
Grasp the edge of the memory module (2), and then gently pull the memory module out of
the memory module slot.
CAUTION:
edges only. Do not touch the components on the memory module.
To protect a memory module after removal, place it in an electrostatic-safe container.
8.
Insert a new memory module:
To prevent damage to the memory module, hold the memory module by the
Adding or replacing memory modules
41
Advertisement
Table of Contents
