System Configuration menu
Select
Language Support
Virtualization Technology (select models only)
LAN Power Saving (select models only)
Fan Always On
Boot Options
Diagnostics menu
Select
Primary Hard Disk Self Test
Memory Test
98
Chapter 12 Setup Utility (BIOS)
To do this
Change the language of Setup Utility.
Enable/disable the processor Virtualization Technology.
Enable/disable LAN Power Saving. When enabled, saves power when
the computer is in DC mode.
Enabled/disable Fan Always On. When enabled, the computer fan will
always be on.
Set the following boot options:
●
POST (power-on self test)
for the
f10
and
f12
functions of Setup Utility in intervals of 5 seconds
each (0, 5, 10, 15, 20).
●
HP QuickWeb—Enable/disable the HP QuickWeb Boot Menu during
POST.
◦
Delay to boot Windows—Set the delay for the HP QuickWeb
Boot Menu to 2, 3, 5, 10, 15, or 30 seconds.
●
CD-ROM Boot―Enable/disable boot from CD-ROM.
●
Floppy Boot―Enable/disable boot from diskette.
●
Internal Network Adapter Boot―Enable/disable boot from the
internal network adapter.
●
Boot Order―Set the boot order for:
◦
Notebook Hard Drive
◦
USB Disk on Key/USB Hard Drive
◦
USB CD/DVD ROM Drive
◦
USB Floppy
◦
Network Adapter
To do this
Run a comprehensive self-test on the hard drive.
NOTE:
On models with two hard drives, this menu option is called the
Primary Hard Disk Self Test.
Run a diagnostic test on the system memory.
f10
and
f12
Delay (sec.)―Set the delay