Table of Contents
Advertisement
Connect to Wi-Fi Overview
Join a Thermostat to Skyport
If the thermostat is connected to the local Wi-Fi access point
but not yet joined to an existing Skyport account, you may
join the thermostat to the account by doing the following:
1. Log in to your Skyport account.
2. Select the "Location" you want to add a thermostat into.
3. Select the "Thermostat tab" .
4. Select "+ Add thermostat" . A screen will 'pop-up' asking for
a six digit code.
5. Press the FAN button on the thermostat for 5 seconds.
6. Press the Warmer button on the thermostat.
7. A six digit code will appear on the thermostat's display.
8. Enter the six digit code into your Skyport account.
Wi-Fi Status Screens
Press and hold the FAN button on the thermostat for 5
seconds. When "Wi-Fi Setup" appears on the display, press
the MODE button. Pressing the up or down button will
sequence through the following information:
• AP Name
• AP Signal Strength
• IP Address
• Skyport Status
• API Status
12
Advertisement
Table of Contents
