Table of Contents
Advertisement
C C able designa-
t t ion
Antenna cable
Antenna cable
1)
2)
6 6 .8.5
Antenna parameter assignment
Depending on the country or region in which the antenna is being operated, it is subject to
regional limitations with respect to the radiated power.
Limitations in the EU, EFTA, or Turkey
Note
L L imitation of the radiated power according to EN 302 208 V1.4.1 (ETSI)
RF600 systems that are put into operation in the EU, EFTA or Turkey must not exceed the
following radiated power with an RF680A antenna:
Make the following settings to ensure that the maximum permitted radiated power of the
antenna is not exceeded:
SIMATIC RF600
System Manual, 06/2019, J31069-D0171-U001-A22-7618
A A rticle number
6GT2815-0BN20
6GT2815-0BN40
Permissible minimum bending radius with one-time bending. 28 mm
With cables capable of being used in drag chains, 100,000 bending cycles at a bending radius of
100 mm and a bend of ± 180° or 3 million torsion cycles with a bend of ± 180° on a cable length of
1 m are permitted.
2000 mW ERP (or 33 dBm ERP)
Converted into EIRP: 3250 mW EIRP (or 35 dBm EIRP)
Antenna gain: 3.5 dBi (6.5 dBic)
Radiated power:
2000 mW ERP (or 33 dBm ERP)
Converted into EIRP:
Use of cable loss associated with the antenna cable.
L L ength [m]
20
40
3250 mW EIRP (or 35 dBm EIRP)
6.8 SIMATIC RF680A
C C able loss [dB]
B B ending radius
[ [ mm]
4
77
5
77
Antennas
343
Advertisement
Table of Contents
