HP OmniBook 7100 User Manual page 28

3
Creating a replacement smart card
1-22
account. (This completes the steps necessary to register your smart card for
Windows NT logon).
8 Locate the recovery file (it may be on a diskette).
9 Open the Encryption Smart Card Security System Manager program (if it is not
already running) and click on the Smart Card tab.
10 If you have stored the recovery file on a floppy disk, insert the diskette into the
floppy drive of your OmniBook.
11 Click on Recover.
You are now prompted to enter the name of the recovery file and the recovery
file password.
12 Click on ... to go to the folder containing the recovery file (or type the full path
name in the filename field) and enter the password for the recovery file.
13 You will be prompted to enter the (new) PIN for the new smart card.
The same key that was on your original smart card is now loaded in the new smart
card, and you can now access and decrypt the files in your Secure folder.