LG UU12 Installation Manual page 23

3) Installation on the floor
Installation of Mount Bracket.
• Select and mark the position for Mount
Brackets and the piping hole.
• Drill the hole for the anchor nut on the wall.
• Drill the piping hole using a ø70 hole-core
drill.
• Secure the Mount Brackets on the wall with
four M4 screws.
Install the indoor unit onto the Mount
Brackets.
• Engage the slot at the back of the unit with
Mount Bracket.
• Drill the piping hole with 70mm dia, hole
core drill.
• Piping hole should be slightly slant to the
outdoor side.
After Installing, reassemble detached parts.
• Hang the 'Inlet Grille' and hook the 'Inlet
Hanger' to the Hanger Screw.
• Assemble the 'Side Plates(R,L)' with 2
screws on both left and right side.
The Indoor Unit Installation
From the left wall
more than 760mm
Slot
Floor mount
bracket
Wall
Indoor
Slot
Wall
From the
right wall
more than 840mm
Outdoor
Floor mount
bracket
Install plate
Piping hole
Installation Manual 23