Table of Contents
Advertisement
Replacing the memory module
The computer has one memory module compartment. The capacity of the computer can be upgraded
by upgrading the existing memory module in the memory module slot.
WARNING!
cord and remove all batteries before installing a memory module.
CAUTION:
any procedure, ensure that you are discharged of static electricity by touching a grounded metal
object.
To replace the memory module:
CAUTION:
Shut down the computer before replacing the memory module. Do not remove the memory module
while the computer is on, in the Sleep state, or in Hibernation.
If you are not sure whether the computer is off or in Hibernation, turn the computer on by pressing the
power button. Then shut down the computer through the operating system.
1.
Save your work and shut down the computer.
2.
Disconnect AC power and all external devices connected to the computer.
3.
Turn the computer upside down on a flat surface.
4.
Remove the battery.
5.
Remove the service door (see
6.
Remove the existing memory module:
a.
Pull away the retention clips (1) on each side of the memory module. The memory module
tilts up.
To reduce the risk of electric shock and damage to the equipment, unplug the power
Electrostatic discharge (ESD) can damage electronic components. Before beginning
To prevent information loss or an unresponsive system:
Removing the hard drive on page
27).
Replacing the memory module
31
Advertisement
Table of Contents
