Display Assembly - HP Mini 210-2000 Maintenance And Service Manual

Display assembly

Description
25.7-cm (10.1-in) display assembly (includes display panel cable, 2 WLAN transceivers and cables, 2 WWAN transceivers
and cables (select models only), and webcam/microphone module and cable):
●
HD, flush glass display assembly in charcoal
●
HD, flush glass display assembly in crimson red
●
HD, flush glass display assembly in luminous rose
● HD, flush glass display assembly in ocean drive blue
●
HD, flush glass display assembly in lavender frost
● WSVGA, flush glass display assembly in charcoal
●
WSVGA, flush glass display assembly in crimson red
●
WSVGA, flush glass display assembly in luminous rose
● WSVGA, flush glass display assembly in ocean drive blue
●
WSVGA, flush glass display assembly in lavender frost
Before removing the display assembly, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the following components:
a. Battery (see
b. Service access cover (see
c. Keyboard (see
d. Top cover (see
5. Disconnect the WWAN antenna cables from the WWAN module (see
(select models only) on page
6. Disconnect the WLAN antenna cables from the WLAN module (see
Remove the display assembly:
1. Close the computer.
2. Turn the computer upside down, with the front toward you.
Battery on page 31).
Service access cover on page
Keyboard on page 46).
Top cover on page 49).
40).
Spare part number
622339-001
622340-001
622341-001
622342-001
622343-001
622334-001
622335-001
622336-001
622337-001
622338-001
34).
WWAN and GPS modules
WLAN module on page
Component replacement procedures
42).
55