Table of Contents
Advertisement
Adjusting the Product Tilt and Height
― The color and shape of parts may differ from what is shown. Specifications are subject to change without
notice to improve quality.
-15.0° (±2.0°) to Left ~ 15.0° (±2.0°) to Right
0 ~ 120.0 mm (±5.0 mm)
•
The monitor tilt and height can be adjusted.
•
When adjusting the tilt and height, hold both sides of the product and avoid using excessive force to
prevent damage.
•
When adjusting the stand height, you may hear a noise. This noise is generated because the ball
inside the stand slides when the stand height is adjusted. It is a normal noise and not a product
malfunction.
-2.0° (±2.0°) ~ +17.0° (±2.0°)
Caution
•
Grasp the left and right sides of the monitor and adjust the tilt.
After adjusting the product tilt and height, if the screen is not level, take the following actions.
•
Hold the bezel at both side edges and adjust the monitor angle until the screen becomes level. (Be
careful not to directly hold the LCD display.)
•
The monitor angle can be adjusted from -4° to +4°.
16
Advertisement
Table of Contents
