Hard Drive - HP EliteBook 8440W Maintenance And Service Manual

Hard drive

✎
The hard drive spare part kit includes drive bracket, screws, and sponge material.
Description
250-GB 7200-rpm SATA hard drive
320-GB 7200-rpm SATA hard drive
500-GB 7200-rpm SATA hard drive
160-GB solid-state drive
256-GB solid-state drive
Before removing the hard drive, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on,
and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then
unplugging the AC adapter from the computer.
4. Remove the battery (see
Remove the hard drive:
1. Position the computer with the front toward you.
2. Loosen the 2 Phillips PM2.0×5.0 captive screws 1 that secure the hard drive cover to the computer.
3. Lift the left side 2 of the hard drive bay cover to detach it from the computer.
4. Remove the hard drive bay cover. The cover is included in the Plastics Kit, spare part number 594091-001.
Maintenance and Service Guide
"Battery" on page 4-7).
Removal and replacement procedures
Spare part number
594044-001
594045-001
594046-001
594047-001
594048-001
4–9