Bluetooth Module And Cable - HP EliteBook 8440W Maintenance And Service Manual

Removal and replacement procedures

Bluetooth module and cable

✎
The Bluetooth module spare part does not include the Bluetooth module cable. The Bluetooth module cable is
included in the Cable Kit, spare part number 594030-001.
Description
Bluetooth module
Before removing the Bluetooth module, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on,
and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then
unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the following components:
a. Hard drive (see
b. Wireless modules antenna cables (see
c. Optical drive (see
d. Keyboard and switch cover (see
e. Display assembly (see
f. RTC battery (see
g. Top cover (see
h. Audio/ExpressCard (see
i. Speakers (see
4–46
"Battery" on page
"Hard drive" on page 4-9)
"WLAN module" on page 4-11
"Optical drive" on page
"Keyboard and switch cover" on page
"Display assembly" on page
"RTC battery" on page
"Top cover" on page 4-42)
"Audio/ExpressCard board" on page
"Speakers" on page 4-45)
4-7).
4-20)
4-27)
4-39)
4-44)
Spare part number
594030-001
and "WWAN module" on page
4-22)
Maintenance and Service Guide
4-14)