Bluetooth Module - HP EliteBook 2740p Maintenance And Service Manual

Bluetooth module

NOTE: The Bluetooth module spare part kit does not include a Bluetooth module cable. The
Bluetooth module cable is included in the Cable Kit, spare part number 597832-001. See
on page 24
The Bluetooth module holder is included in the Plastics Kit, spare part number 597829-001. See
Plastics Kit on page 23
Description
Bluetooth module
Before removing the Bluetooth module, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet,
and then unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the following components:
a.
b.
c.
Remove the Bluetooth module:
1. Position the computer right-side up, with the front toward you.
2. Remove the foam insulator from in front of the module (1).
3. Remove the Phillips PM2.0×4.0 screw (2) that secures the Bluetooth module holder to the
computer.
56 Chapter 4 Removal and replacement procedures
for more Cable Kit spare part number information.
for more Plastics Kit spare part number information.
Battery on page
Hard drive cover (see Hard drive on page
Keyboard (see Keyboard on page
Top cover (see Top cover on page
39).
41)
48)
51)
Cable Kit
Spare part number
537921-001
ENWW