HP DV4-2153 Maintenance And Service Manual page 90

5. Disconnect the wireless antenna cables from the WLAN module (see
6. Remove the following components:
a. Keyboard (see
b. Keyboard cover (see
c. Speaker (see
Remove the display assembly:
1. Locate the wireless antenna cable (1), and remove from path (2).
2. Disconnect the wireless antenna cable from the system board (3).
3. Remove the wireless antenna cable from the path (1) and disconnect it from the system board
(2).
CAUTION:
To prevent damage to the display assembly, support it before removing the screws.
4. Remove the four Phillips PM2.5×7.0 screws (1) that secure the display assembly to the computer.
82 Chapter 4 Removal and replacement procedures
Keyboard on page
Keyboard cover on page
Speaker assembly on page
The display assembly will be unsupported when the following screws are removed.
72)
74)
77)
WLAN module on page 62).