TV tuner antenna
Description
TV tuners
●
ATSC/NTSC TV tuner antenna
●
TV tuner antenna with PAL jack
●
ATSC/NTSC TV tuner
●
DVB-T/ANG Integrated TV tuner
●
DVB-T tuner
●
DVB-T tuner for use only in the AP region
If it has been determined that the TV tuner antenna cable is the component that must be replaced to
complete the computer repair, follow the procedures in this section to replace the cable.
Before removing the TV antenna cable, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4.
Remove the battery (see
5.
Remove the keyboard (see
6.
Remove the keyboard cover (see
7.
Remove the display assembly (see
8.
Remove the top cover (see
9.
Remove the USB board (see
Remove the TV tuner antenna cable:
1.
Disconnect the TV tuner antenna cable from the system board (1).
Battery on page
55)
Keyboard on page
72)
Keyboard cover on page
Display assembly on page
Top cover on page
92)
USB board on page
Spare part number
482900-001
482900-002
482899-001
482899-002
482899-003
482899-004
74)
80)
103)
Component replacement procedures 105