HID312, HID525, HID540
Service Manual
Dispensing Bin
The dispensing bin may be removed for cleaning or to
provide service access to other components.
1. Go thru steps 1 thru 10 of the Bin Cleaning
Procedure above.
2. Remove chute cover.
3. Remove ice sweep and ice discharge chute.
Ice
Sweep
4. Remove dispense motor drive pin.
5. Twist and remove the water and ice dispense
chutes.
6. Remove the
Ice
Discharge
Chute
7. Remove splash
8. Locate two
9. Locate bin drain
Dispense
Drive Pin
10. Lift the bin up
April 2015
Page 20
chute mounting
panel.
panel, disconnect
sensors from
harness and set
panel aside.
plastic knob bolts
under the bin.
Remove them.
and disconnect it
from bin fitting.
and off the
chassis. Clean as
needed.