Computer Setup Defaults - HP Compaq Presario,Presario M2000 Maintenance And Service Manual

Computer Setup Defaults

To return all settings in Computer Setup to the values that were
set at the factory:
1. Open Computer Setup by turning on or restarting the
computer. Press
message is displayed in the lower-left corner of the screen.
❏
❏
2. Use the arrow keys to select Exit > Load Setup Defaults.
3. Press
4. Press enter to confirm the return to default configuration.
5. To confirm the restoration, press
6. Select Exit > Exit Saving Changes, and then follow the
instructions on the screen.
When the computer restarts, the factory settings are restored, and
any identification information you have entered is saved.
Maintenance and Service Guide
f10
To change the language, use the arrow keys to select the
Advanced menu, select Language Support, and then
press or until the appropriate language is highlighted.
f5 f6
Press to save your selection and exit the Advanced
f10
menu.
To view navigation information, press
.
f9
while the "Press <F10> to enter Setup"
f10
Troubleshooting
.
f1
.
2–3