Electrical Requirements; Recommended Grounding Method; Leveling The Wine Cooler - EdgeStar IWR600DZ Owner's Manual

Fully integrated wine refrigerator
Table of Contents

Advertisement

EdgeStar Wine Refrigerator

Electrical Requirements

ELECTRIC SHOCK HAZARD!
 Plug into a grounded 3-prong outlet.
 Never remove the grounding prong from the plug.
 Never use an adapter to bypass the grounding prong.
 DO NOT use an extension cord.
 Failure to follow these instructions can result in fire,
electrical shock, or death.
Before you move your wine cooler into its final location, it is important to
make sure you have the proper electrical connection:
A standard electrical supply (115 V, 60Hz), properly grounded in
accordance with the National Electrical Code and local codes and
ordinances, is required.
It is recommended that a separate circuit, serving only your wine cooler,
be provided. Use receptacles that cannot be turned off by a switch or pull
chain.
The fuse (or circuit breaker) size should be 3 Amps.

Recommended grounding method

For your personal safety, this appliance must be grounded. It is equipped
with a power supply cord having a 3-prong grounding plug. To minimize
possible shock hazard, the cord must be plugged into a mating 3-pronged
wall socket, and grounded in accordance with the National Electrical
Code and local codes and ordinances. If a mating wall socket is not
available, it is the personal responsibility of the customer to have a
properly grounded, 3-prong wall receptacle installed by a qualified
electrician.

Leveling the Wine Cooler

It is important for the wine cooler to be leveled in order to work properly. It
can be raised or lowered by rotating the plastic sheaths around each of
the feet on the bottom of the machine. If you find that the surface is not
level, rotate the feet until the wine cooler becomes level .You may need to
make several adjustments to level it. We recommend using a carpenter's
level to check the machine.
1. Place a carpenter's level on top of the product to see if the wine cooler
is level from front to back and side to side.
2. Adjust the height of the feet as follows:
Turn the leveling feet to the right to lower that side of the cooler.
Turn the leveling feet to the left to raise that side of the cooler.
4

Advertisement

Table of Contents
loading

Table of Contents