Parts Identification; Front View; Installing The Wine Cooler; Unpacking The Wine Cooler - EdgeStar IWR600DZ Owner's Manual

Front View

Handle
Tip: Gather the model
and serial number
from the product label
and write them down
before installing the
wine refrigerator.
EdgeStar Wine Refrigerator

Parts Identification

Installing the Wine Cooler

The wine cooler should be installed in accordance with local electrical
code requirements. The wine cooler should also be placed in a location
that is strong enough to support its total weight, keeping in mind that it will
weigh substantially more when fully loaded than when empty.
Before you plug the wine cooler into a power supply, be sure to let it stand
upright for at least 24 hours to allow the compressor's oils to settle.

Unpacking the Wine Cooler

WARNING: Use two or more people to move and install the wine cooler.
Failure to do so can result in back or other injury. Carefully remove the
packaging materials. Remove any shipping tape and glue from your wine
cooler before using. Do not use sharp instruments, rubbing alcohol,
flammable fluids, or abrasive cleaners to remove tape or glue. These
products can damage the surface of your wine cooler.
IMPORTANT:

Do not remove any safety, warning, or product information labels
from your wine cooler.

Do not touch the power plug when your hands are wet.

Never unplug the unit by pulling on the plug.
Control Panel
Shelf
2