2.1.4
M.2 installation
Supported M.2 type varies per motherboard.
•
•
•
When installing an M.2 to the M.2 slot, you may need to use the removable screw stand.
1.
Remove the screws from the heatsink.
2.
Remove the heatsink.
1
2-6
The illustrations only show the installation steps for a single M.2 slot, the steps are
the same for the other M.2 slots if you wish to install an M.2 to another M.2 slot.
Use a Phillips screwdriver when removing or installing the screws or screw stands
mentioned in this section.
The M.2 is purchased separately.
1
2
2
1
1
Chapter 2: Basic Installation