Table of Contents
Advertisement
I-Prime, Default = Buffer Print
Determines what the printer will do when it receives the
I-Prime signal from the software.
• Buffer Print: prints out the buffer contents before resetting.
• Buffer Clear: dumps the buffer contents immediately.
• Invalid: causes the printer to ignore the I-Prime command.
Select this setting if you wish to enter settings through the
printer's control panel which will not be automatically
overridden by the software's settings when the I-Prime
signal is sent.
Language Set, Default = American
Replaces certain standard symbols with special characters used
in foreign languages.
Line Spacing, Default = 6 lpi
Change to 8 lines per inch (lpi) to get more lines on a page.
Microline 420/421User's Guide
38
Operator Panel Function, Default = Full Operation
Change to Limited Operation to deactivate the
and
buttons, so that these features can
CHARACTER PITCH
only be controlled through your software. This prevents these
from being changed from the control panel when several
people are using the printer.
Important!
This feature also prevents access to the Menu. To access the
Menu in these circumstances, turn the printer off, then hold
down the
key while turning on the printer.
SEL
Page Length, Default = 11"
Selects the length of the paper you are using. This enables the
printer to keep track of the initial printing position (TOF) on
each page.
Page Length Control, Default = by Actual Page Length
If you are printing single sheets no longer than 17 inches and
wish the printer to acknowledge the menu setting for Top Feed
Page Length, change the setting to "by Menu Setting."
PRINT QUALITY
Advertisement
Table of Contents
