Power Limitation; Section Cut From The Countertop - Smeg SAI4954D Translation Of The Original Instructions

5.4 Power limitation

The appliance is factory set to use the
maximum available power: 7.4 kW.
The maximum power of the
appliance can be regulated via
the user menu.

5.5 Section cut from the countertop

The following operation requires
building and/or carpentry work
and must therefore be carried out
by a competent tradesman.
Installation can be carried out on
various materials such as masonry,
metal, solid wood or plastic
laminated wood as long as they
are heat resistant (>90°C).
Create an opening with the dimensions
shown in the figure in the countertop of the
piece of furniture.
Hob seal
To prevent leakage of liquid between the
frame of the hob and the countertop, place
the adhesive seal provided along the entire
outer edge of the hob before assembly.
Do not use silicone to secure the
hob. This would make it impossible
to remove the hob, if necessary,
without damaging it.
36
Installation
Overall dimensions (mm)
L
600
700
900
Semi-flush mounting dimensions (mm)
A
min.
50
L
600
700
900
1 = Electrical connection
X
555 ÷ 560
555 ÷ 560
840
B C
min. min.
20÷60
460 750
F
147
147
144
Y
478 ÷ 482
478 ÷ 482
478 ÷ 482
D E
min.
50
G
145
220
181