Registering The Current Playback Song/Station (Preset Function); Registering To A Preset; Recalling A Preset; Clearing A Preset - Yamaha R-N803 D Owner's Manual

Registering the current playback song/station (Preset function)

When you select network sources and USB as the input
source, you can register the current playback song or
streaming station as a preset up to 40.
You can then easily recall any preset song/station by
selecting its preset number.
The following input sources can be set as presets.
Server, Net Radio, USB and streaming services.
Note
• You can also register songs and stations as presets using
"MusicCast CONTROLLER" (p.20).
• When you register music files stored on a USB storage device
or a PC/NAS, this unit memorizes the relative position of the
music files in the folder. If you have added or deleted any music
files to or from the folder, this unit may not recall the music file
correctly. In such cases, register the items again.
LINE 1
TUNER
NET
BAND
MEMORY
MEMORY
ENTER

Registering to a preset

1
Playback a song or streaming station you
want to register.
2
Press MEMORY.
Note
By holding down MEMORY for more than 3 seconds, you can
skip the following steps and automatically register the selected
song/station to an empty preset number (i.e., the preset number
following the last preset number used).
3
PRESET j / i to select the preset number to
which the song/station will be registered.
If you select a preset number to which no station is
registered, the message "Empty" is displayed.
4
Press MEMORY.
When registration is complete, the display returns to
the original state.
Note
To cancel registration, press RETURN.
LINE 2 LINE 3
NET USB
USB
TUNING
PRESET j / i
PRESET
ENTER
Registering the current playback song/station (Preset function)

Recalling a preset

1
Press NET or USB to select the desired input
source.
2
Press PRESET j / i to select a preset
number.
3
Press ENTER to recall preset.
Note
• It may take a while to recall a preset song or a preset station.
• To cancel recalling, press RETURN.
• You can also recall preset songs or preset stations using
"MusicCast CONTROLLER" (p.20).

Clearing a preset

1
Press NET or USB to select the desired input
source.
2
Press PRESET j / i to select a preset number
to be cleared.
3
Press CLEAR on the front panel to clear the
preset.
If the preset content is cleared, "Empty" appears.
41
En