Table of Contents
Advertisement
computer system chassis, disconnect the fan assembly and the automatic
power switching board (Figure 7-20).
7.
Gently lift and remove the power supply subassembly from the system
chassis.
To replace the power supply subassembly chassis, reverse steps 1 through 6.
Chapter 7.7 Fan Assembly
To remove the fan assembly, complete the following steps:
1.
Remove the power supply subassembly chassis (see Section 7.6).
2.
Cut the two cable ties that secure the fan assembly power cable to the
system chassis.
3.
Using a Phillips screwdriver, remove the two mounting screws and lift the
fan assembly from the system chassis (Figure 7-21).
Hide quick links:
Advertisement
Table of Contents
