Connecting Audio - HP Compaq NX9100 Reference Manual

3. Verify that your television is displaying the correct video
source. Refer to your television documentation for
instructions.
4. Press
mode. Press
video modes.
5. Refer to the instructions provided with your notebook to
configure the television as the primary display or to configure
advanced video features.

Connecting Audio

The Expansion Base provides an S/PDIF digital audio jack for an
optional digital audio connection. A coaxial digital audio cable
(not provided) and an audio receiver (television or stereo) with a
coaxial digital audio port is required to fully enable this feature.
To connect digital audio:
1. Connect a coaxial digital audio cable into the orange S/PDIF
digital audio jack on the back of the Expansion Base 1.
2. Connect the other end of the cable into the digital audio jack
on your television or stereo equipment 2. Refer to your
television or stereo equipment documentation for the
connector name and location.
Reference Guide
on the notebook to change your video output
fn+f4
repeatedly to cycle through the available
fn+f4
Using the Expansion Base
2–15