Changing The Wireless Mouse Settings; Connecting To A Modem - HP Compaq NX9100 Reference Manual

Changing the Wireless Mouse Settings

To set pointer speed and shape, click speed, mouse trails, and
other preferences for your wireless mouse, select Start >
Control Panel > Printers and Other Hardware > Mouse.

Connecting to a Modem

You can connect your notebook through the Expansion Base
to your analog telephone line for dial-up communication.
This requires the 2 RJ-11 modem cables that came with your
Expansion Base.
1. Connect one end of the short modem cable into the RJ-11
(telephone) connector on the upper rear panel of the
Expansion Base 1. Connect the other end of the cable into
the RJ-11 connector on the notebook 2.
2. Connect one end of the long modem cable into the RJ-11
(telephone) connector on the lower rear panel of the
Expansion Base 3. Connect the other end of the cable
into the RJ-11 wall jack 4.
✎
Reference Guide
A country-specific modem adapter also may be required, in
addition to the modem cable connected to the RJ-11 wall jack.
Using the Expansion Base
2–11