Picture Adjustment
You can adjust the projector's picture to your preferences using the "Picture" menu. For
operation of the menu screen, see pages
Example: "Picture" screen menu for
Adjusting the Image
Select the item on the "Picture" menu and
adjust the image.
Description of Adjustment Items
Selectable items
Contrast
for less contrast.
Bright
for less brightness.
Color
for less color intensity.
Tint
for making skin tones purplish.
Sharp
for less sharpness.
Red
for weaker red.
Blue
for weaker blue.
Note
• "Color", "Tint" and "Sharp" are not displayed
when selecting INPUT 1 and setting the "Sig-
nal Type" to "RGB".
• "Sharp" can be adjusted when 480
580
I
, 580P, 720P, 1035
detected while "Signal Type" for INPUT 1 is set
to "Component".
• To reset all adjustment items, select "Reset" and
press
-36
Downloaded from:
http://www.usersmanualguide.com/
INPUT 1 (RGB) mode
Press
Press
\
for more contrast.
for more brightness.
for more color intensity.
for making skin tones greenish.
for more sharpness.
for stronger red.
for stronger blue.
, 480P, 540P,
I
I
or 1080
I
signals are
.
32
to 35.
CLR Temp
Color Temperature)
Select "CLR Temp" on the "Picture" menu
and the desired color temperature setting.
Description of Color Temperature Settings
|
Selectable settings
5500K
6500K
7500K
8500K
9300K
10500K
Note
• Values for "CLR Temp" are only approximations.
(Adjusting the
Description
For lower color temperature for warmer,
reddish incandescent-like images.
For higher color temperature for cooler, blu-
ish, fluorescent-like images.