Midea PD Series Manual page 22

Window Installation Kit(Optional)
Step 1: Preparing the Exhaust Hose assembly
Press the exhaust hose into the window slider adaptor (into wall window slider adaptor for wall installation)
and unit adaptor, clamp automatically by elastic buckles of the adaptors.
Step 2: Install the Exhaust hose assembly to the unit
Insert unit adaptor of the Exhaust hose assembly into the lower groove of the air outlet of the unit while the
hook of the adaptor is aligned with the hole seat of the air outlet and slide down the Exhaust hose assembly
along the arrow direction for installation.
Step 3: Preparing the Adjustable Window Slider
1. Depending on the size of your window, adjust the size of the window slider.
2. If the length of the window requires two window sliders, use the bolt to fasten the window sliders once
they are adjusted to the proper length.
20