Repairing The Operating System - HP Compaq NC6110 Getting Started Manual

Repairing the Operating System

To attempt an operating system repair without deleting your
personal data, use the Operating System disc that was shipped
with the notebook:
✎
If your notebook does not have an optical drive, you may need
to connect to an optional external MultiBay.
1. Connect the notebook to external power through the
AC adapter and turn on the notebook.
2. Immediately insert the Operating System disc into the
notebook.
3. Press and hold the power/standby button for at least 5 seconds
to turn off the computer.
4. Press the power/standby button again to turn on the notebook.
5. When prompted, press any key to start from the disc.
After a few minutes, you may need to select your language,
and then the Setup Wizard opens.
✎
6. Press
A licensing agreement page is displayed.
7. Press
The "Setup" page is displayed.
8. Press
The repair process begins. This process takes 1 to 2 hours
to complete.
The notebook restarts in Windows after the process is
complete.
Getting Started
On the "Welcome to Setup" page, do not press
this procedure) until you have completed steps 6 and 7.
to continue.
enter
to accept the agreement and continue.
f8
to repair the selected Windows installation.
R
System Recovery
(step 8 in
R
A–7