HP Compaq NC4000 Hardware And Software Manual page 205

To display ROM information in Computer Setup:
1. Turn on or restart the notebook. Press
"F10 = ROM Based Setup" message is displayed in the
lower-left corner of the screen.
❏
❏
2. Use the arrow keys to select File > System Information and
then press
The ROM information is displayed.
3. To exit Computer Setup without changing any settings,
use the arrow keys to select File > Ignore Changes and
Exit, and then follow the instructions on the screen.
After Computer Setup closes, the notebook restarts in
Windows.
Hardware and Software Guide
To change the language, press
For navigation instructions, press
enter.
Software Update and Recovery
while the
f10
f2.
f1.
14–3