Reinstalling Device Drivers And Other; Software - HP Compaq NC4000 Hardware And Software Manual

6. Press
displayed.)
7. Press
page is displayed.)
8. Press
system instead of repairing it.
9. Press
10. Press
11. Select Format the partition using the NTFS file system
(Quick) and then press
Ä
CAUTION: Formatting this drive deletes all current files.
12. Press
This process takes 1 to 2 hours to complete. The notebook
restarts in Windows when the process is complete.)

Reinstalling Device Drivers and Other

Software

After the operating system installation process is complete, you
must reinstall drivers.
To reinstall drivers, use the Application and Driver Recovery disc
included with the notebook:
1. While running Windows, insert the Application and Driver
Recovery disc into the optical drive.
If you do not have Autorun enabled, select Start > Run.
Then type
the optical drive).
2. Follow the on-screen instructions for installing the drivers.
After the drivers are reinstalled, you must reinstall any software
you added to the notebook. Follow the installation instructions
provided with the software.
Hardware and Software Guide
to continue. (A licensing agreement page is
enter
to accept the agreement and continue. (The "Setup"
f8
to continue installing a new copy of the operating
esc
to set up the operating system.
enter
to continue setup using this partition.
C
to format the drive. (The reinstallation process begins.
F
D:\SWSETUP\APPINSTL\SETUP.EXE
Software Update and Recovery
.
enter
(where D indicates
14–15