System Information - HP Compaq NC4000 Hardware And Software Manual

Hp compaq notebook series
Hide thumbs Also See for Compaq NC4000:
Table of Contents

Advertisement

Security

System Information

System Information provides details about your notebook and
battery pack. The following sections explain how to prevent other
users from viewing system information and how to configure
system information options in Computer Setup.
The System Information menu allows you to
Display or enter the notebook serial number, asset tag, and
ownership tag.
Display a battery pack serial number.
To prevent unauthorized access to this information, you must
create an HP administrator password. For instructions, refer to
the
"Setting HP Administrator Passwords"
chapter.
To set System Information options:
1. Shut down the notebook. If you are not sure whether the
notebook is off or in hibernation, turn the notebook on by
pressing the power/standby button, and then shut down the
notebook through the operating system.
2. Be sure that the hard drive is inserted into the notebook
(not into an optional docking device or external MultiBay).
3. Open Computer Setup by turning on or restarting the
notebook and pressing
Setup" message is displayed in the lower-left corner of the
screen.
12–18
To change the language, press
For navigation instructions, press
while the "F10 = ROM Based
f10
f2.
f1.
Hardware and Software Guide
section, earlier in this

Advertisement

Table of Contents
loading

Table of Contents