Parts On The System Board - Lenovo 30CE Hardware Maintenance Manual

Connect an Ethernet cable for a local area network (LAN).
Note: To operate the computer within Federal Communications Commission (FCC) Class B limits, use a
Category 5 Ethernet cable.
5 USB 3.1 connectors Gen 2 (2)
With greater data transfer rate and faster charging speed, the USB 3.1 connector Gen 2 is used to connect
USB-compatible devices, such as a USB keyboard, a USB mouse, a USB storage device, or a USB printer.
6 USB 3.0 connector
Use this connector to attach a USB-compatible device, such as a USB keyboard, mouse, storage drive, or
printer.
Note: The USB 3.0 connector supports the smart power on feature that enables you to turn on the computer
or wake it up from hibernation mode by pressing Alt+P on the keyboard. You can enable or disable the smart
power on feature from the Setup Utility program.
7 HDMI-out connector
Used to send video and audio signals from your computer to another audio or video device, such as a high
performance monitor.
8 USB 3.0 connector
Use this connector to attach a USB-compatible device, such as a USB keyboard, mouse, storage drive, or
printer.
9 DisplayPort connector
Use this connector to attach a high-performance monitor, a direct-drive monitor, or other compatible
devices.
10 Power-cord connector
Connect the power cord to your computer for power supply.

Parts on the system board

Note: See "Front view" on page 29 or "Rear view" on page 30 for additional component descriptions.
32
P330 Tiny Hardware Maintenance Manual