Table of Contents
Advertisement
Internal speaker
Attention: Do not open your computer or attempt any repair before reading and understanding the Chapter
1 "Read this first: Important safety information" on page 1.
1. Remove any media from the drives and turn off all connected devices and the computer.
2. Disconnect all power cords from electrical outlets and disconnect all cables that are connected to the
computer.
3. Remove the computer cover. For details, see "Computer cover" on page 95.
4. Disconnect the internal speaker cable from the internal speaker connector on the system board. See
"Parts on the system board" on page 32.
5. Replace the internal speaker.
a. Remove the internal speaker.
Figure 36. Removing the internal speaker
b. Install the internal speaker.
Figure 37. Installing the internal speaker
6. Connect the internal speaker cable to the internal speaker connector on the system board. See "Parts
on the system board" on page 32.
7. Reinstall the computer cover and reconnect the cables. For details, see "Completing the parts
replacement" on page 131.
100
P330 Tiny Hardware Maintenance Manual
Advertisement
Table of Contents
