System Board - HP Compaq 6530s Maintenance And Service Manual

System board

NOTE: All system board spare part kits include the ExpressCard assembly.
NOTE: All system board spare part kits include replacement thermal material.
Description
For use only with computer models equipped with AMD processors
For use only with computer models equipped with Intel processors with UMA graphics subsystem
and a GM45 system board
For use only with computer models equipped with Intel processors with UMA graphics subsystem
and a GL40 system board
For use only with computer models equipped with Intel processors (includes 128-MB DDR2 discrete
graphics system memory)
For use only with computer models equipped with Intel processors (includes 256-MB DDR2 discrete
graphics system memory)
Before removing the system board, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the following components:
a. Hard drive (see
b. Optical drive (see
c. Keyboard (see
d. Switch cover (see
e. Speakers (see
f. Display assembly (see
g. Top cover (see
h. USB connector module (see
i. Bluetooth module (see
j. Fan (see
k. RTC battery (see
Battery on page
Hard drive on page
Optical drive on page
Switch cover and keyboard on page
Switch cover and keyboard on page
Speakers on page
Display assembly on page
Top cover on page
USB connector module on page
Bluetooth module on page
Fan on page 77)
RTC battery on page
46).
47)
55)
57)
57)
61)
62)
68)
73)
75)
Component replacement procedures
Spare part number
497613-001
501354-001
491250-001
491977-001
491976-001
72)
79