Fan - HP Compaq 6530s Maintenance And Service Manual

Fan

Description
Fan
Before removing the fan, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the following components:
a. Hard drive (see
b. Optical drive (see
c. Switch cover (see
d. Keyboard (see
e. Speakers (see
f. Display assembly (see
g. Top cover (see
Remove the fan:
1. Disconnect the fan cable (1) from the system board.
2. Remove the two Torx T8M2.5×6.0 screws (2) that secure the fan to the base enclosure.
Battery on page 46).
Hard drive on page 47)
Optical drive on page
Switch cover and keyboard on page
Switch cover and keyboard on page
Speakers on page 61)
Display assembly on page
Top cover on page 68)
55)
57)
57)
62)
Component replacement procedures
Spare part number
490324-001
77