Page 2
Listed by the Canadian Standards Association, CSA C22.2 No. 61010.1.04 Do not connect this equipment to public communications networks, such as telephone systems. See the warning below. Do not put products that contain circuit boards into waste containers. Refer to local regulations for disposal procedures.
Page 3
Features Speaker Test port indicator Adapter Main unit Battery cap Speed 81 coupler* Toner cap * F-type coupler that helps you make connections faster. Auto Shut-Off The main unit turns off if the condition of the line does not change for 10 minutes.
Page 4
How to Use the Toner For unterminated cable, connect the correct adapter to an ID cap or the toner cap, then connect the cap to the far end of the cable. Connect the correct adapter to the main unit. Turn on the main unit, then connect it to the near end of the cable.
Use only replacement parts that are approved by Fluke Networks. If you replace parts that are not specified as replacement parts, the warranty will not apply to the product and you can make the product dangerous to use.
Cleaning Caution To prevent damage to the display or the case, do not use solvents or abrasive materials. To clean the case, use a soft cloth that is moist with water or water and a weak soap. Specifications Approximate distance: 300 m (1,000 ft) Output voltage in continuity mode: 3.6 Vdc (with a new battery) Toner frequency: Main unit: 2.7 kHz.
Contacting Fluke Networks www.flukenetworks.com info@flukenetworks.com 1-800-283-5853, +1-425-446-5500 Fluke Networks 6920 Seaway Boulevard, MS 143F Everett WA 98203 USA Fluke Networks operates in more than 50 countries worldwide. For more contact information, go to our website.
LIMITED WARRANTY AND LIMITATION OF LIABILITY Fluke Networks mainframe products will be free from defects in material and workmanship for one year from the date of purchase, unless stated otherwise herein. Parts, accessories, product repairs and services are warranted for 90 days, unless otherwise stated.