Compaq Armada e500s Maintenance And Service Manual page 47

10. Align the front cover of the half-height drive with the tab on the front of the bezel
cage (Figure 5-17).
NOTE: The bezel cage should be aligned so the "L" and "LEFT" indicators can
be read when the half-height drive is installed in the expansion base left
half-height bay.
11. Install the four screws
Figure 5-17. Attaching the Bezel Cage to the Half-Height Drive
that secure the half-height drive to the bezel cage.
Removal and Replacement Procedures 5-17