Installing A Modem Or Modem/Network Interface Card - Compaq Armada E500 Series Maintenance And Service Manual

Installing a Modem or Modem/Network Interface Card

1. Remove the mini PCI slot cover.
2. Remove the two screws
to the system board (Figure 5-4).
3. Make sure the appropriate RJ11/RJ45 covers are removed from the
base enclosure.
4. Install the card into the mini PCI slot, making sure to seat the card
connector on the system board
Figure 5-4. Installing a Modem or Modem/Network Interface Card
Reverse the installation procedure described above to remove a modem
or modem/Network Interface Card.
1
that secure the modem or modem/NIC
2
.
Removal and Replacement Procedures 5-5