Voltage Converter Board - Compaq Armada E500 Series Maintenance And Service Manual

5.16 Voltage Converter Board

IMPORTANT: When replacing the system board, remove the voltage
converter board and retain it for use on the new system board. A new
voltage converter board is not shipped with the new system board.
Voltage converter board
Removing the Voltage Converter Board
1. Prepare the computer for disassembly (Section 5.3) and, in the
order below, remove the following components:
Modem or modem/Network Interface Card (Section 5.5)
Touch button (Section 5.6)
Keyboard (Section 5.7)
Display assembly (Section 5.9)
LED board (Section 5.11)
Top cover (Section 5.12)
Front shield (Section 5.13)
Diskette drive (Section 5.14, Armada V300 only)
System board (Section 5.15)
2. Turn the system board bottom side up and position the board so the
I/O bracket faces forward.
5-34 Removal and Replacement Procedures
Voltage Converter Board
Spare Part Number Information
152928-001