No Sound.
No Sound.
The head unit cannot access the Digital Media system.
Audio skipping occurs during playback.
Tips and Troubleshooting Chart (cont'd)
Problem
Cause and Solution
•
Adjust the volume of the head unit.
•
Make sure the head unit has the Digital Media
player as the active source.
•
File(s) on your cartridge may be corrupt. Run the
PhatNoise DMS Doctor on your computer and follow
the recommendations.
•
If you have just downloaded new firmware, this is
normal. Wait about seven minutes until the green
light stops blinking, then both lights should go off.
Many things can cause a "skip", or any break during
playback. If you are hearing breaks in playback, here
are some things to check:
•
When you hear a skip, restart the track, or seek
backwards a bit, to hear if the skip is actually in the
music file.
•
Check to see if you are using the latest firmware
and desktop software. This is very important, as
software is updated frequently. See PhatNoise Music
Manager manual.
•
Sometimes a heavily fragmented cartridge can skip
due to increased seek times. Defragment the
cartridge for best performance. See PhatNoise
Media Manager™ software instructions for
defragmenting a cartridge.
365