Table of Contents
Advertisement
HIBERNAT Utility
NOTE:
Select the suspend-to-disk option in the SCU and reboot the notebook to
find out if the suspend-to-disk partition is already created. If it is not
created or if there is an insufficient size, you will get an error message.
The HIBERNAT.EXE utility program allows you to create the suspend-to-disk
partition in your hard drive, which is required for the Suspend-to-Disk function of
your notebook.
You can locate the file under the \Utility directory on the CD-ROM. To utilize the
program, follow this command syntax:
HIBERNAT -Pnn
where nn specifies the size (in MB) of the partition.
You must specify a memory size larger than your current memory size plus 8MB.
The partition, as shipped from the factory, is 206MB to allow for future upgrade of
your memory. Use the command "HIBERNAT -p206" to duplicate the factory
partition size. If you do not specify the parameter, the default size will be your
system RAM plus 8MB. The extra 8MB is for the overhead of the program and
data held in video memory.
You can clear the contents of the partition using the HIBERNAT -C command. The
command is useful only when you are backing up the data in the hard drive.
Software Drivers and Utilities
6-7
Advertisement
Table of Contents
