Table of Contents
Advertisement
LPT Port
The "LPT Port" item sets the settings of LPT port.
When this item is selected, the submenu will display as shown below.
( ) None
( ) LPT1, Addr 378, IRQ7 ( ) Bidirectional (PS-2)
( ) LPT2, Addr 278, IRQ5 ( ) Enhanced Parallel (EPP)
( ) LPT3, Addr 3BC, IRQ7 ( ) Extended Capabilities (ECP)
Your system supports EPP (Enhanced Parallel Port) and ECP (Extended
Capabilities Port) standards which turn the standard parallel port into a high speed
bi-directional peripheral port. If you select ECP item, you can further choose which
DMA channel to use.
Keyboard Numlock
The "Keyboard Numlock" item sets if the numeric keypad will function.
NOTE: If you disable this option, you can only activate the numeric
keypad by holding down the [Fn] key first, even when the Num Lock
indicator is on. However, an externally-connected keyboard is not affected
by this feature.
When this item is selected, no submenu will display. A check mark ( ) indicates
Enabled; an underline ( _ ) indicates Disabled.
The default setting is Enabled.
Setup Configuration Utility
( ) Standard AT (Centronics)
( ) DMA 0
( ) DMA 1
( ) DMA 3
EPP Type:
EPP 1.7
5-11
Advertisement
Table of Contents
