Table of Contents
Advertisement
4. Using Menus
4-2. Table of adjustment menus
Menus in parentheses are menus for our service personnel. Normally, these menus cannot be used.
Main menu
Title Select
"Title Memory Name"
TEST Pattern
Configuration
Light Setup
Lens Control
Reset
(Setup)
Installation (Note)
(Memory)
(Title Setup)
Preset Button
50
Submenu
Selects the title of the signal to be projected.
Selects the test pattern to be projected.
Adjust
Adjusts light brightness.
Lens Position
Adjusts the position of the projected screen.
Focus Zoom
Adjusts the size and focus of the projected screen.
(FactoryDefault)
Returns the settings to their default values. Selects between preset buttons
and titles only, LAN settings only and all settings.
Filter Cleaning
Initializes the air filter usage time (for confirming the filter cleaning time).
(Fan Usage)
Initializes the usage time of the fan.
(Light Usage)
Initializes the usage time of the light source.
(Phosphor)
Initializes the usage time of the phosphor.
(Diffuser)
Initializes the usage time of the diffuser.
(Pump)
Reset the pump usage time.
(Douser Count)
Resets the number of times the douser has been used.
Douser Setup
Sets the douser open/close state.
Panel Key Lock
Locks the buttons on the projector's control panel so that they cannot be
operated.
Auto Key Lock
Enables or disables Auto Key Lock.
3D Reference
Sets the signal input terminal for a 3D image system (3D terminal or GPI/O
terminal).
Sets the video input port for 3D video systems.
Off Timer
Sets the time until the projector power is turned off automatically.
Message
Sets the time to display the message indicating the light replacement cycle,
air filter replacement cycle, and air filter cleaning cycle.
Silent Mode
Selects whether to use the status indicator, buzzer, indicators on the control
panel and backlight.
(Option Slot)
Configures the device installed in slot (only when the projector is in
standby mode).
(Orientation)
Sets the projection method and cooling fan operating mode.
Lens Type (Note)
This function cannot be used.
Lens Calibrate (Note)
Performs calibration on lens that support the lens memory function (only
when the projector power is turned on).
Lens Center (Note)
Moves the lens shift position to the center (only when the projector power is
turned on).
(Baudrate)
Sets the PC control connector (RS-232) data transmission speed (bps).
(Date/Time)
Sets the date and time on the projector.
(Fan Speed Mode)
Sets the cooling fan operating mode.
(Service)
(Only when the projector is in standby mode)
This is used during shadow adjustment and lens mount adjustment (focus
balance adjustment).
(LD Calibrate)
Performs calibration of the light module when the light module has been
replaced (only when the projector power is turned on).
Light
The content of the selected light memory (light output power value) can be
overwritten with the current settings.
Lens
The content of the selected lens memory can be overwritten with the current
settings.
Preset Button 1–16
Sets the title to be assigned to the preset buttons (<1> to <8> buttons).
Description
Reference
page
52
52
53
53
53
-
53
-
-
-
-
56
-
-
-
-
-
-
-
-
-
-
54
54
54
-
-
-
-
-
-
-
55
Advertisement
Table of Contents
