NEC DLP Cinema NP- NC2403ML User Manual page 7

Table of Contents

Advertisement

Label Information
About the laser module used in the light source
• This product has a built-in laser module. Control and adjustment procedures other than those described in this document
may result in exposure to hazardous laser radiation.
• This product is classified as a Class 1 of Laser Product Safety Standard JIS C 6802: 2014, IEC 60825-1 3rd Edition: 2014.
This product is classified as Risk Group 3 of IEC/EN 62471-5 1st Edition: 2015.
• This product is classified as RG3 of IEC 62471:2006. (for USA).
• This product complies with performance standards for laser products under 21 CFR Part 1040 except with respect to
those characteristics authorized by Variance Number 2015-V-3435 effective on April 7, 2016.
Outline of laser emitted from the built-in light module:
Wave length: Red 635–647 nm, Blue 450–470 nm
Maximum power: Red 91 W, Blue 978 W
Radiation pattern from the lens (the protective housing):
Wave length: Red 635–647 nm, Blue 450–470 nm
Maximum laser radiation output: Red 500 mW, Blue 900 mW
The explanatory label of the laser product is put on the top of the projector.
CLASS 1 LASER PRODUCT
WARNING RG3 PRODUCT
• No direct exposure to the beam shall be permitted.
• Do not look into the projector's lens. Serious damage to your eyes could result.
• Hazardous optical radiation is emitted from this product.
• Not for household use.
• Operators shall control access to the beam within the hazard distance and install the product at the height that will
prevent exposures of spectators' eyes within the hazard distance.
• This projector must be installed high enough to provide clearance for people who may walk beneath the beam path or
hazard distance. (FDA)
Label C
Label B
Label E
Label A
Label D
Important Information
7

Advertisement

Table of Contents
loading

Table of Contents